snoop command in HP UK

[mª del Carmen_1]

Hi all,
is there anyone who knows the command in HP-UX similar to the SUN command snoop?

Thanks in advance

[Joshua Scott]

I'm not well versed in solaris, but nettl/netfmt may be what you are looking for.

Josh

[Robert-Jan Goossens_1]

Hi,

http://hpux.connect.org.uk/hppd/hpux/Networking/Admin/tcpdump-3.8.3/

Is similar to sun solaris snoop.

Regards,
Robert-Jan

[Peter Godron]

Hi,
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=79133
and
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=625638
have all the details.
Regards

[Sanjay_6]

Hi,

Take a look at the nettl / netfmt commands.

Here is a link from itrc on how to use nettl/netfmt to look at the network traffic,

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000067002634

The itrc doc id is KBRC00001357.

Hope this helps.

Regds

[Jeff Schussele]

Hi,

My favorite snooper is ethereal - available here:

http://hpux.connect.org.uk/hppd/hpux/Gtk/Applications/ethereal-0.9.15/

But it should be noted that to have the best chance of capturing it all, run it on neither the source nor destination because you're bound to lose "some" traffic simply due to the loads of handling *both* the traffic & the logging. Just pick another system on the same subnet with no to little load with a decent I/O capacity.

Rgds,
Jeff

[mª del Carmen_1]

Thanks to all for your help.