HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

snoop command in HP UK

 

snoop command in HP UK

Hi all,
is there anyone who knows the command in HP-UX similar to the SUN command snoop?

Thanks in advance
6 REPLIES 6
Joshua Scott
Honored Contributor

Re: snoop command in HP UK

I'm not well versed in solaris, but nettl/netfmt may be what you are looking for.

Josh
What are the chances...
Robert-Jan Goossens_1
Honored Contributor

Re: snoop command in HP UK

Hi,

http://hpux.connect.org.uk/hppd/hpux/Networking/Admin/tcpdump-3.8.3/

Is similar to sun solaris snoop.

Regards,
Robert-Jan
Peter Godron
Honored Contributor
Sanjay_6
Honored Contributor

Re: snoop command in HP UK

Hi,

Take a look at the nettl / netfmt commands.

Here is a link from itrc on how to use nettl/netfmt to look at the network traffic,

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000067002634

The itrc doc id is KBRC00001357.

Hope this helps.

Regds
Jeff Schussele
Honored Contributor

Re: snoop command in HP UK

Hi,

My favorite snooper is ethereal - available here:

http://hpux.connect.org.uk/hppd/hpux/Gtk/Applications/ethereal-0.9.15/

But it should be noted that to have the best chance of capturing it all, run it on neither the source nor destination because you're bound to lose "some" traffic simply due to the loads of handling *both* the traffic & the logging. Just pick another system on the same subnet with no to little load with a decent I/O capacity.

Rgds,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!

Re: snoop command in HP UK

Thanks to all for your help.