HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

tpmC & SPU tier information

 
SOLVED
Go to solution
Mad_1
Regular Advisor

tpmC & SPU tier information

Does anyone has the following information?

tpmC information of HP9000 rp74xx and rp84xx
What SPU tier of rp74xx and rp84xx should be?

Thanks
3 REPLIES 3
Michael Tully
Honored Contributor
Solution

Re: tpmC & SPU tier information

Some TPM figures are attached.

The tiers are level two for rp74xx and three for rp8400
Anyone for a Mutiny ?
Michael Tully
Honored Contributor

Re: tpmC & SPU tier information

Also try here:

http://www.tpc.org/
Anyone for a Mutiny ?
Ted Buis
Honored Contributor

Re: tpmC & SPU tier information

Most software, but not all, has been changed with 11i from Tiers to per processor licenses, and be aware that OpenView products have their own tier structure compared to that of the software tiers from the other middleware products for HP-UX. OpenView has a different structure because their product are not only for HP-UX, but for SUN, IBM, etc.

With respect the tpmC, it will depend on the processor and it's speed. The new pa8800 processor are not likely to have published numbers at this time, specifically, the rp7420-16 and rp8420-32 (900MHz or 1 GHz).
The tpmC for these new systems could double the results (pure speculation) from the prior pa8700+ models, since they have twice as many processors that are each faster. Just remember that in the real world (your specific use) that disk I/O, memory, or network could be your limiting factor in performance.
Mom 6