HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

trying to create new npar on risc

 
SOLVED
Go to solution
pedliz12
Advisor

trying to create new npar on risc

does anyone have a link to creating new npars in a risc machine This is what i have:[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis0 Active yes cab0,cell0 0
cab0,bay0,chassis1 Active yes cab0,cell1 0
cab8,bay0,chassis0 Active yes cab0,cell2 0
cab8,bay0,chassis1 Active yes cab0,cell3 0
3 REPLIES 3
Sandy Chen
Honored Contributor
Solution

Re: trying to create new npar on risc

Hi,

check on this link
http://docs.hp.com/en/5991-1247B/index.html

Regards,
Sandy
I never think of the future. It comes soon enough.
Avinash Agarkar
Valued Contributor

Re: trying to create new npar on risc

uou can use the parstatus command to query which cells (-AC) and which IO cardcages (-AI) are currently available.


#parstatus -AC

#parstatus -AI

#parstatus -P

[Partition]

Par # of # of I/O

Num Status Cells Chassis Core cell Partition Name (first 30 chars)

=== ============ ===== ======== ========== ===============================

0 active 1 1 cab0,cell0 Partition 0

--
create the new partation with name test

parmodify -p 0 -P test

--
check the new partation has been created with

parstatus -P


--

This new partition will be partition 1 and will be called test. include the cell 4 as the only cell in the partition and will detail the boot paths as appropriate (this would require that I know the hardware paths to appropriate devices

#parcreate -P uksd2 -c 0/4::: -b 4/0/6/0/0.0.0 -t 4/0/6/0/0.8.0

Partition Created. The partition number is: 1

#parstatus -Vp 1

Thanks,
Avinash
Great Power Comes With Great Responsibility
pedliz12
Advisor

Re: trying to create new npar on risc

i have to open a new thread