Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
HPE BladeSystem Management Software
cancel
Showing results for 
Search instead for 
Did you mean: 

Onboard Administrator (OA) USB connect question

Highlighted
chuckk281
Trusted Contributor

Onboard Administrator (OA) USB connect question

James was working with a customer:

 

***************

 

I have a large storage customer asking me the following question:

 

We've been using the thumb drives connecting to OnBoard Administrator.  I know when we started using them we formatted them as FAT32, I'm wondering if you know of another format we can use.  With 2012 R2 going over 4 GB, it is not working.

 

Can anyone answer this with authority?  And does this answer vary depending on the OA firmware level and Generations of the enclosure and/or blades installed?

 

Forgot to state:  They are using the OA USB connection to load OS images onto BOOT FROM SAN vdisks being served up from an EVA P6550.

 

***************

 

Reply from Chad:

 

****************

 

You can use EXT2 or EXT3 though I haven’t had success with EXT2 and anything larger than 4 GB (even though it should go up to 16GB) with the OA

 

Do to this on a Windows laptop, use EaseUS Partition Master Home Edition and Ext2FSD driver from Sourceforge then you can drag and drop within Windows.

 

**************

 

Input from Dan:

 

*************

 

The OA only supports EXT2 or EXT3 for larger file sizes.

 

*************

 

Comments or questions?