HP Gbe2c L2/L3 Switch online but no access possible

[j_bauernfeind]

Hi,

we have 2 C7000 Chassis with 2 HP Gbe2c L2/L3 Switch in each of them. The problem is that the Switches in the first Chassis are online, but no access is possible

Portscan

Host is up (0.041s latency).
Not shown: 997 closed ports
PORT    STATE SERVICE
22/tcp  open  ssh
80/tcp  open  http
443/tcp open  https

But when i try to connect, nothing happens, only timeout.

The only way to reconnect is to reset the blade switches which is a bad solution ;-)

The Switches in the other bladecenter are running fine.

All have the same firmware + boot firmware (5.2.9)

Any suggestions?