Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
HPE BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Hardware configuratin for Xenserver

Highlighted
topokin
Advisor

Hardware configuratin for Xenserver

We have 7 BL460-G7 Servers on C7000 chasis and all servers connect through VC. 5 installed with Windows Server 2008 R2 while 2 installed with XenServer 6.2. All servers are on Server-subnet.

 

We have File-Servers (NetApp vFilers) on the Storage-subnet. However the Xenserver-host and its VMs are having problem connecting to these File-Servers on the storage-subnet. The Windows-Servers do not have any problem.

 

Is there any special configuration required on the Hardware for the Xenserver.

 

Thanks