HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

1709 Slot X Drive Array

JBD
Occasional Visitor

1709 Slot X Drive Array

Hello,

I just install a new Bl460c G8 with 2 fresh HD SAS 500G in raid1 and i receive this error warning at boot:  

1709-Slot X Drive Array - One or more attached drives could not be authenticated as a genuine HP drive...

...Smart Array will not control the LEDs to these drives. Please run ACU or ADU to learn which drives could not be validated as genuine.



When i run ACU he say nothing more ...

All firmware is updated:
HP Smart Array P220i Controller: Firmware version 4.68
HD SAS model MM0500FBFVQ, Firmware version: HPD8

Status is degraded (not authentified)
If anyone have a idea !
Thank

 

 

P.S. This thread has been moved from General  to HP BladeSystem Server Blades. - Hp Forum moderator

2 REPLIES
Torsten.
Acclaimed Contributor

Re: 1709 Slot X Drive Array

Since you use current firmware already, you should discuss the issue with hp support directly.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
OwenQ
Occasional Visitor

Re: 1709 Slot X Drive Array