HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL 465 G6 Blade RAM position

curtisdac
Occasional Visitor

BL 465 G6 Blade RAM position

I am mixing RAM stick sizes and want to know if there is an order that they need to go in.  Does the smaller ram go into the 1a 2a and 5c 6c slots? I am told that when mixing sizes either the smaller ram needs to go in first or the larger but not sure which. I would also like to know if this holds true for all HP Servers and if there is a link to find this information?

1 REPLY
PGTRI
Honored Contributor

Re: BL 465 G6 Blade RAM position

hi,

 

... from the quickpsecs of  the server:

 

"

 

  • If mixing DIMM sizes on the same processor, the largest capacity DIMMs must be populated in the bank physically farthest from the processor. The smallest capacity DIMMs must be populated in the bank physically nearest the processor.

 

"

 

http://h18004.www1.hp.com/products/quickspecs/13348_div/13348_div.HTML

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS!