HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c G1 blades and NC325M Quad-Port Nics

HP_hardware
Occasional Advisor

BL460c G1 blades and NC325M Quad-Port Nics

I have 4 blades that I plan to attach to an iscsi san for vmware infrastructure.  Each blad currently has a 326m (dual-port NIC) in mezzanine slot 2.  I want to add to each blade a NC325M quad-port nic but I understand that if these are placed in mezzanine slot 1 then only two ports are active.  My question is, if I move the dual-port nic cards to slot 1 and install the NC435M quad-port nics in mezzanine slot 2, will all 4 ports on the nic be available?

 

Thanks,

 

DG

2 REPLIES
Jimmy Vance
HPE Pro

Re: BL460c G1 blades and NC325M Quad-Port Nics

Yes, as long as you fill all the corresponding I/O module slots with networking modules




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
HP_hardware
Occasional Advisor

Re: BL460c G1 blades and NC325M Quad-Port Nics

Yes, I have the requisite pass-through networking modules installed.

Thanks!

 

DG