HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c G7, post error "Controller Error: DDR test failed"

Piotr0007
Occasional Contributor

BL460c G7, post error "Controller Error: DDR test failed"

Hi everyone

 

if anyone of you have met with such a problem. During startup bug appears. After several restarts error disappears. I was updating bios and Emulex driver. What could be the cause.

original.png


2 REPLIES
Suman_1978
HPE Pro

Re: BL460c G7, post error "Controller Error: DDR test failed"

Hi,

 

Issue seems to be with Emulex, according to some manuals at Emulex, this is what it says:

 

Issue: You receive any of the following POST error messages or warnings:
Redboot Initialization failed...
Firmware Load failed...
DDR config failed...
DDR callibrate failed...
DDR test failed...
SEEPROM checksum failed...
Secondary firmware image loaded...

 

 

Answer/Solution:

These POST messages indicate that you must reload the UCNA firmware using OneCommand Manager or one of the Emulex online or offline utilities. If the error(s) persist, contact Technical Support.

 

 

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Useful Links for ProLiant Servers

Piotr0007
Occasional Contributor

Re: BL460c G7, post error "Controller Error: DDR test failed"

thank you for you help

 

i will try do that.