HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL465c G1 - Higher Capacity SAS Drives

SOLVED
Go to solution
sgunelius
Valued Contributor

BL465c G1 - Higher Capacity SAS Drives

I'd like to press a BL465c G1 back into service, but need more internal storage and the QuickSpecs listed the HP 146GB 3G SAS 10K SFF as the highest capacity drive this server (and its E200i storage controller) can accommodate.  I made a call to HP and they stated that there is 300GB equivalent drive that'll work, but does anyone know if any of the following drives listed in the QuickSpecs for G6 model (also E200i) will also work?

 

Part Number      Description

507127-B21         HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

581284-B21         HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

581286-B21         HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

 

Thank you.

2 REPLIES
scharchouf
HPE Pro
Solution

Re: BL465c G1 - Higher Capacity SAS Drives

Yes any one of theme is supported on E200i, you chan check the QuickSpecs for the card E200i

 

http://h18004.www1.hp.com/products/quickspecs/12460_div/12460_div.pdf

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

sgunelius
Valued Contributor

Re: BL465c G1 - Higher Capacity SAS Drives

Thanks for the quick response!  I found the E200i QuickSpecs this morning before I checked the forum.  So I guess I could even consider the 900GB 6G SAS 10K, granted the E200i is only capable of 3G SAS, so it would step down, but I really need the capacity without going to SATA.  Thanks again.

 

Scott