Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL620c G7 reboot/reset causes power off

BL620c G7 reboot/reset causes power off

We have a couple of G7 blades, no matter what the OS is loaded, if you hit the reset button on the ILO/OA the server powers off and doesn't power back on until you hit the virtual power button again.

We have also noticed that if you issue the "reboot' command from Linux OS it will cause the same issue. This is very incovenient as you imagine. we had the servers visited by Field Engineers and got they system boards replaced without result..

Any ideas ?