HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL870c i2 connecting with a LTO tape drive

Pramod M
Regular Advisor

BL870c i2 connecting with a LTO tape drive

Hi Experts,

 

We have to connect an external tape drive (LTO4 / LTO5) to our new BL870c i2 Box, running HP-UX 11iv3 VSE. FC HBA is available on this box. What is the best solution? I was checking for a LTO- 5 External tape Drive with FC interface, but I am not able to find the same. SCSI and SAS interface are available. We dont have any free device bays to use the HP Tape Blade. We are planning to use fbackup for the filesystem backup.

I can see that HP 1/8 G2 LTO-5 Ultrium 3000 Fibre Channel Tape Autoloader is available with FC interface. Is this the only cost effective solution available? Please advise...

 

Thanks in advance..

 

Pramod

1 REPLY
Torsten.
Acclaimed Contributor

Re: BL870c i2 connecting with a LTO tape drive

According to the specs the HP 1/8 G2 Tape Autoloader is available with FC interface. IMHO if you load the tapes manually you can use the loader as ignite backup media. Note: you probably need to use the "2 step method" while recovering (boot from install media (DVD) and load data from tape.

http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12169-304612-82176-82176-82176-3319912.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!