HPE Community
BladeSystem - General
1752782 Members
6080 Online
108789 Solutions
New Discussion

Re: Bl460c Gen9 keeps failing with PCI Bus Error message

 
puf-pant
Occasional Visitor

‎10-16-2015 06:57 AM

‎10-16-2015 06:57 AM

Bl460c Gen9 keeps failing with PCI Bus Error message

Hi,

 

we installed two new chasis with 20 Bl460c blades and updated the BIOS to the latest version (1.50)

After firmware update servers keep failing with error message PCI Bus Error (Slot 3, Bus 0, Device 1, Function 0) and the server screen fills up with red coloured text resembling memory dumps. After restart server boots up fine and than work for some time (week-two).

 

Servers are still not used, but they will have to go in production soon. Hope someone has any ideas. 

0 Kudos
Reply
1 REPLY 1
puf-pant
Occasional Visitor

‎11-19-2015 04:26 AM

‎11-19-2015 04:26 AM

Re: Bl460c Gen9 keeps failing with PCI Bus Error message

Hi all,

resolved the issue with the latest 1.52 FW update.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.