HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

C7000 mixing half and full baldes in a zone

elgamal2020
Occasional Visitor

C7000 mixing half and full baldes in a zone

Hello,

 

I have read on the quick spec guide that there is no possibility to mix full hight and half height within a quadrant zone .

 

Is there any way to overcome this limitation via any customized solution as I have reamianing two slots which I want to install two half blade while there is already another full blade installed in this zone ?

 

Thanks in advance 

Best Regards

1 REPLY
Torsten.
Acclaimed Contributor

Re: C7000 mixing half and full baldes in a zone

You cannot install a half height blade in the upper row, because there is no divider that can hold the blade in this position. Your only workaround may be to install a blade in the lower bay only.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!