Cache Status: Not Configured

[bomb_1]

Hi,

I would like to know why is my array controller showing this message. We have replaced the batteries, unplug/plug the cables, but its still showing the same. I'm not sure how this affects the array.

=> ctrl all show config detail

Smart Array 6i in Slot 0
Bus Interface: PCI
Slot: 0
Cache Serial Number: xxxxx
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Chassis Slot:
Hardware Revision: Rev B
Firmware Version: 2.80
Rebuild Priority: Low
Expand Priority: Low
Surface Scan Delay: 15 sec
Cache Board Present: True
Cache Status: Not Configured
Accelerator Ratio: 100% Read / 0% Write
Read Cache Size: 0 MB
Write Cache Size: 0 MB
Total Cache Size: 128 MB
Battery Pack Count: 1
Battery Status: OK
SATA NCQ Supported: False

Array: A
Interface Type: Parallel SCSI
Unused Space: 0 MB
Status: OK

Logical Drive: 1
Size: 67.8 GB
Fault Tolerance: RAID 1+0
Heads: 255
Sectors Per Track: 32
Cylinders: 17433
Stripe Size: 128 KB
Status: OK
Array Accelerator: Disabled
Unique Identifier: 600508B1001844395354383152460009
Disk Name: /dev/cciss/c0d0
Mount Points: /boot 95 MB, /var 16.0 GB, /mlextras 8.0 GB, / 8.0 GB, /tpmon 513 MB, /tools 5.0 GB, /ml_apps 14.2 GB

physicaldrive 1:0
SCSI Bus: 1
SCSI ID: 0
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 320 Wide
Size: 72.8 GB
Transfer Speed: 320 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB4
Serial Number: 3KT4WQ4800007650E4ZR
Model: COMPAQ BD0728A4C4
physicaldrive 1:1
SCSI Bus: 1
SCSI ID: 1
Status: OK
Drive Type: Data Drive
Interface Type: Parallel SCSI
Transfer Mode: Ultra 320 Wide
Size: 72.8 GB
Transfer Speed: 320 MB/Sec
Rotational Speed: 10000
Firmware Revision: HPB4
Serial Number: 3KT4BJ8T00007650AQXG
Model: COMPAQ BD0728A4C4

I tried "ctrl slot=0 modify cacheratio=50/50", but it still shows 100/0.

I don't know what else to try. Please help.

Regards,
Bomb

[bomb_1]

Product Name: ProLiant BL45p G1

[MSI-Phil]

You need an HP SmartCache license and you must Disable the HP SSD Smart Path.