HPE Community
BladeSystem - General
1753988 Members
5858 Online
108811 Solutions
New Discussion

Re: Controller status is failed on system board for BL 460C Gen9

 
hsarva777
Occasional Contributor

‎11-23-2016 08:56 AM

‎11-23-2016 08:56 AM

Controller status is failed on system board for BL 460C Gen9

Hello All , 

We are using ProLiant BL 460C Gen9 , In ILO's the storage is failed and the controller status is failed. Can you suggest me with the sollution. should we need to replace the HP smart array p244br controller. Thanks    

0 Kudos
Reply
1 REPLY 1
Robert_Jewell
Honored Contributor

‎11-25-2016 12:13 PM

‎11-25-2016 12:13 PM

Re: Controller status is failed on system board for BL 460C Gen9

Hard to say without further details.  From SSA utility see if you can locate more info about what is actually failed.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.