HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Does BL460c G7's Integrated NC553i support Ethernet Pass-Through Module for HP BladeSystem

chuckk281
Trusted Contributor

Does BL460c G7's Integrated NC553i support Ethernet Pass-Through Module for HP BladeSystem

Shawn was looking for confirmation:

 

****************

 

Understand that under Product Bulletin listed under support interconnect for NC553m, it does not list 406740-B21, 1GbE Pass-Thru as a supported interconnect as it does not list it under below:

 

·         HP 6120XG Blade Switch

 

·         HP 6120G/XG Blade Switch

 

·         HP GbE2c Layer 2/3 Ethernet Blade Switch

 

·         HP 1:10Gb Ethernet BL-c Switch

 

·         Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem

 

·         Cisco Catalyst Blade Switch 3120X/G for HP c-Class BladeSystem

 

·         HP 10GbE Pass-Thru Module

 

·         HP Virtual Connect Flex-10 10Gb Ethernet Module

 

·         HP Virtual Connect FlexFabric 10Gb/24-port Module

 

·         HP Virtual Connect 1/10Gb Ethernet Module

 

·         HP Virtual Connect 1/10Gb-F Ethernet Module

 

Therefore seek to double confirm if it makes any difference if it’s a NC553i (integrated) instead.

 

*******************

 

From Hiro:

 

**********************

 

You have to upgrade firmware of 1Gb Pass-Thru module.

Please see this advisory.

 

Advisory: (Revision) HP NC550m, NC551m, NC552m, and NC553i 10GbE Server Adapters - False Link Status May Be Indicated when the Adapters Are Mapped to a 1 Gb Pass-Thru Module Even When No Cable Is Attached

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02473928&lang=en&cc=us&taskId=101&prodSeriesId=4085948&prodTypeId=3709945

 

*********************

 

Have you seen any issues? Let us know please.