E200i RAID controller or HP HD SMART problem?

[Oxygenius]

I have a strange problem with a bl460c G1 blade.

I get several confusing failures:

E200i failure: 1783 POST with cmd 0h, err 00h, dlu 02581:0h error

when I change IRQ in BIOS en set it back the errror is gone

But I get another error:

1720 Both HD's, which were OK are supposed to have both SMART errors and should be replaced.

I also het 1719 sometimes.

I upgraded firmware to 1.84. I cannot het 1.85 or 1.86 on it since I run ESX on it.

Any ideas, what is actually wrong?

[Johan Guldmyr]

If you can't install from the OS - you can boot the server on the Firmware Maintenance DVD (or nowadays called HP SPP DVD).

Which smart errors are you seeing? Are they increasing?