BladeSystem - General
1747997 Members
4525 Online
108756 Solutions
New Discussion

Re: FC connectivity on HP blade 860c2

 
NDO
Super Advisor

FC connectivity on HP blade 860c2

 

 

Hi

 

I have a C7000 chassis, with several blades, and a 1 HP 4Gb FC interconnect bay. I am having difficulties in connecting one particular blade to its FC ports, please tell me how to identify what FC port corresponds to what server.

 

your help will be appreciated

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: FC connectivity on HP blade 860c2

There is a relation between the mezzanine slot of the server and the interconnect bay of the enclosure.

 

Where are your components installed?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
NDO
Super Advisor

Re: FC connectivity on HP blade 860c2

Hi

 

I think I have just found out, I have used a web browser to check port mappings and I saw as attached that there is already connectivity between bay 5 where my server is, and slot 5. I beleive I am right, please correct me if I am wrongblade.jpg