HPE Community
BladeSystem - General
1752671 Members
5660 Online
108789 Solutions
New Discussion юеВ

Re: HP ProLiant BL460c G6 - iLO network configuration problem

 
ratafonso
Occasional Contributor

тАО03-24-2017 06:08 AM

тАО03-24-2017 06:08 AM

HP ProLiant BL460c G6 - iLO network configuration problem

Hello Guys,

We have a problem with my Blade Server HP ProLiant BL460c G6.

My Blade cannot get IP Address from iLO and show me a error below:

"iLO network configuration problem, check connectivity to iLO default gateway".

We tried to reset the blade, I remove the battery from motherboard for 40 minutes and plug on the enclosure again, after a few minutes, the message is showing again.

In attachment, follow the print screen of OA.

Somebody can help me to resolve this?

Thank You Guys.

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО03-24-2017 06:23 AM

тАО03-24-2017 06:23 AM

Re: HP ProLiant BL460c G6 - iLO network configuration problem

Did you check the EBIPA setting in OA?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
ratafonso
Occasional Contributor

тАО03-24-2017 06:38 AM

тАО03-24-2017 06:38 AM

Re: HP ProLiant BL460c G6 - iLO network configuration problem

I tried to check the EBIPA, but, i can't see anything. I tried to configure the EBIPA, but, i don't know how to do.

Following "Show All" in attachment.

Obs.: For to see the Show All, rename the file from .jpeg to .log

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.