BladeSystem - General
1748033 Members
4787 Online
108757 Solutions
New Discussion

Re: HP ROM-Based Setup Utility User Guide - Latest!

 
chuckk281
Trusted Contributor

HP ROM-Based Setup Utility User Guide - Latest!

ProLiant servers all come with a configuration utility that is embedded in the on board system ROM.

This ROM-Based Setup Utility (RBSU) performs a wide range of configuration activities

that may include:

Configuring system devices and installed options

Displaying system information

Selecting the primary boot controller

Configuring online spare memory

 

RBSU is available in two interfaces: a menu-driven interface and a BIOS Serial Command Console

(CLI) interface.

 

With the recent release of the ProLiant Gen8 servers, the RBSU User's Guide has been updated. Here is the latest and greatest.

 

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00191707/c00191707.pdf

 

 

Or use: http://www.hp.com/support/RBSU_UG_en

 

Let us know if yoou have any questions or comments.

2 REPLIES 2
kolsen
Occasional Visitor

Re: HP ROM-Based Setup Utility User Guide - Latest!

Hello,

 

I notice that the updated RBSU guide for G8s, specifically excludes the DL580G8. Is there a guide specific to it?

 

I have a customer who needs to disable cores on the 580G8, and I want to make sure this functionality is implemented on this platform.

 

Thanks!

FloraD
Frequent Visitor

Re: HP ROM-Based Setup Utility User Guide - Latest!

The RBSU user guide excludes the DL580 Gen8 because that server is UEFI-based.

 

The doc set you need for the DL580 Gen8:

http://www.hp.com/go/ProLiantUEFI/docs

 

Thanks!

I am an HP employee.