HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SUM failing with "Error: Discovery Failed"

JMDDSI
Occasional Visitor

HP SUM failing with "Error: Discovery Failed"

Using the latest HPSUM 5.3.5 on Server 2008 R2 SP1. I launch the application as Administrator and then add a target, the onboard administrator. I give the credentials and start the discovery process. It runs for about 30 seconds and then reports that the process failed during discovery. The only information is to check the logs which I checked. There's next to no information in the log files. 

 

This is the entry from the log file:

 

////////////////////////////////////////////////////////////////////////////////
//  HP Smart Update Manager for Target 172.27.38.210 Started: Wed May 15 2013 12:05:16
////////////////////////////////////////////////////////////////////////////////

1 REPLY
SvMel687
HPE Pro

Re: HP SUM failing with "Error: Discovery Failed"

Hi,

maybe discovery process blocked by firewall. You can check Windows firewall ports if enabled for HP SUM - page 64 - http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03673114/c03673114.pdf or disable temporary Windows firewall.

 

regards

 

 

Im HP employee