HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

How to install ROM update on HP BL460c Gen 8 using hpsum

SOLVED
Go to solution
luffywallis
Occasional Visitor

How to install ROM update on HP BL460c Gen 8 using hpsum

Hi all;

I updated the C7000 enclosure using hpsum, and it detected my blades as iLo devices, the OA and VC. So i only did the update for iLo in my blades, as well as the update for OA and VC. The installed ROM firmware on my blades is I31 11/02/2014 (not the last version http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5177951&swItemId=MTX_1d6eb36c88374db9b71f044ffa&swEnvOid=4166) and i can see the last update in the components of my baseline. So how do i make hpsum detect those updates, and is it possible to do them after the update of OA and VC? Thanks

1 REPLY
Torsten.
Acclaimed Contributor
Solution

Re: How to install ROM update on HP BL460c Gen 8 using hpsum

There are many ways to do this ...

Point HPSUM to the OS IP address of the blades (discover).

If they run a supported OS, you can update firmware and drivers that way.

You should use SPP 2016.10.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!