BladeSystem Forums Have Moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
HPE BladeSystem Server Blades
Showing results for 
Search instead for 
Do you mean 

IML problem entry after Chassis firmware upgrade

Highlighted
Occasional Contributor

IML problem entry after Chassis firmware upgrade

I recently upgraded the OA firmware in a c7000 Blade Chassis.

 

Now, on some of my servers in that chassis, I have an IML log entry:

 

Chassis Enclosure Serial Number XXXXXXX requires minimum firmware revision 03.10.  It is currently 04.01.

 

Any idea why this happens.

Screen shot attached.

 

Thanks,

Steve

2 REPLIES
Acclaimed Contributor

Re: IML problem entry after Chassis firmware upgrade

not enough information, but ilo and bios are likely still too old.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Contributor

Re: IML problem entry after Chassis firmware upgrade

Torsten, thank you for your reply.

 

The blade is a BL460c G7.  As part of the same upgrade, I upgraded the iLO 3 and did a ROM flash.  I wanted to apply the ROM flash because HP stated there was a critical update required.

 

My server runs WIndows 2008 (not R2).

 

I will attach screen shots of the firmware and software I have.

Thanks,

Steve