HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Is it Possible to Read Array Configuration from iLO3?

pakm11
Advisor

Is it Possible to Read Array Configuration from iLO3?

Bare metal blade servers (NO OS).

I am tyring to find out a scriptable way to pull this information either from iLO or OA CLP.

Anyone had any experience?

3 REPLIES
Torsten.
Acclaimed Contributor

Re: Is it Possible to Read Array Configuration from iLO3?

Try to press F10 at the end of boot to go to the maintenance menu, select Inspect and run the Array Configuration Info tool.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Psychonaut
Respected Contributor

Re: Is it Possible to Read Array Configuration from iLO3?

Not that I know of, you have to fire up the server and go into the utility to see that info.

Goutham_Sabala
Esteemed Contributor

Re: Is it Possible to Read Array Configuration from iLO3?

I dont think so, access the server through ILO and boot to ACU from smart start ( offline method )

Was the post useful? Say thanks by clicking the white KUDOS Star!
Goutham Sabala