Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

OneConnect/OneCommand iSCSI HBA Config on BL460c G7 Blades

HalR
Occasional Contributor

OneConnect/OneCommand iSCSI HBA Config on BL460c G7 Blades

Has anyone been able to successfully install and use the OneCommand CLI tool?  I've installed the latest 3 versions of the tool for RedHat 5 & 6 without any luck.  I can get the tool to install, after adding all the extra libraries but everytime I try an "hbacmd" that involves iSCSI commands, I get the error message "MAC address is invalid or does not exist".  I've tried using both the data port MACs and the iSCSI port MACs but no luck.  Any hints would be greatly appreciated.