HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Port MAP for C7000 with BL8x0 i2 and Quad Port Mezz Card

chuckk281
Trusted Contributor

Port MAP for C7000 with BL8x0 i2 and Quad Port Mezz Card

Hieu had a port mapping question:

 

****************

 

One question regarding port mapping on BL460c GEN8 using C7000 Enclosure.

If I put the 1Gb 4-port 366M Adapter into Mezzanine Slot 1 on BL460c GEN8. I’m not sure whether this 4-port Adapter route to interconnect bay 3 & 4 or  interconnect bay 3, 4, 5 & 6.

Could someone help to confirm for this?

 

**************

 

Input from Diane:

 

****************

 

That doesn’t change on the Gen8 from the G7.  Mezz slot 1 maps to slots 3 & 4.  You have to go to slot 2 if you want to use a 4 port option.

 

This is in the Quick Specs:

Form factor

Type I mezzanine card compatible with all ProLiant c-Class Gen8 servers listed in the Supported Servers section of this QuickSpecs, all mezzanine slots. Multiple cards per server.
NOTE: If the 366M is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.

 

Look here as well:

Page 8-9 on HP Integrity BL860c i2, BL870c i2 & BL890c Installation Guide

 

 

**************

 

Questions?