HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to upgrade BIOS on a BL495c G5

JörgW
Occasional Collector

Unable to upgrade BIOS on a BL495c G5

Hi,

 I'm trying to upgrade bios on an BL495c G5 server.

but i got a error message

 

---------------------------------------------------------------------------
Setup Session Beginning   2011-07-27 - 15:54:06
---------------------------------------------------------------------------
Command Line Parameters Given:
Name:            Online ROM Flash for Windows - HP ProLiant BL495c G5 (A14)
New Version:     2009.12.09

Determining component installation state...
The software is installed but is not up to date.
 
Current Version: 2009.07.27
 

 
The installation procedure did not complete successfully.  An error occurred during the setup process.

Additional Information:
 An attempt to unlock the system ROM was not successful.

---------------------------------------------------------------------------
End Session
---------------------------------------------------------------------------

 

What to do?

 

Thanks in advanced

 

1 REPLY
Jimmy Vance
HPE Pro

Re: Unable to upgrade BIOS on a BL495c G5

Check the system maintenance switch and see if switch #2 is in the on position. Switch #2 locks the configuration.

 

Refer to the maintenance and service guide for component locations

 

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01554908/c01554908.pdf

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!