Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
HPE BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

ilo network


ilo network

My datacenter provider has one c7000 with ebipa addressing on theirs bays.

I buy 2 half blade for install on datacenter and I need know if I can request Datecenter to change the addressing of my two blades to static network different than EBIPA addresing and the idea is can administer the two ILOs of my blade servers without affect c7000 network environment.


I attached a similar show config enclosure configuration


The devices of enclosure are:


SHOW INTERCONNECT INFO ALL o Interconnect Bay Power Summary:
1 HP 1/10Gb VC-Enet Module
2 HP 1/10Gb VC-Enet Module
3 Brocade 4/24 SAN Switch for HP
Onboard Administrator #1 Firmware Ver. : 3.30
Onboard Administrator #2 Firmware Ver. : 3.30



Is it possible?

if ebipa has 192.168.30.x/24 addressing I need which my ilo are on 172.16.x.x/16 network and then I connect that network on virtual machine of one blade for only admin proposes.


Thanks a lot.




Re: ilo network

any idea?