HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

not able to access ILO from website

SOLVED
Go to solution
vaibhavc
Occasional Advisor

not able to access ILO from website

I have HP blade server c7000 enclosure. I was accessing ILO from last 3 years. But from last few days I am not access the same.

I am trying to ping the IP but I am getting request time out. ILO port is blinking, I reconnect it but still the same issue.

Please help me to sort out the issue.

Regards

Vaibhav Chavan

 

2 REPLIES
Robert_Jewell
Honored Contributor
Solution

Re: not able to access ILO from website

Do you mean the enclosure OA?  Try performing an OA reset.  You can do this by the small button on the OA module.  If you have two OA's installed, be sure to reset the active one (active LED will be lit).

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
vaibhavc
Occasional Advisor

Re: not able to access ILO from website

Yes.. Thanks a lot. It ie working after resetting OA.