Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
HPE BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

"HP Smart Update Manager stopped working" on BL460c G6

StPi
Occasional Contributor

"HP Smart Update Manager stopped working" on BL460c G6

Good morning,

 

I have some strange issues when trying to install HP drivers on a BL460c G6 with ProLiant Support Pack.

Each time I try it, HP SUM crashes during the discovery of the local host (Event ID 1000).

This happens on Windows Server 2008R2 and also on a freshly installed Windows Server 2012R2.

I also tried several versions of HP SPP (09/2013, 09/2014, 04/2015) and all of them crash.

I mounted the .iso via ILO, started it over the network and even copied the .iso to C: and mounted it locally.

Starting HPSUM (7.2.0.0) on a different machine and updating the node remote doesn't work, either. The 'hpsum_service' is being created and started but crashes shortly after. Windows eventlog shows event IDs 1000 and 1001 (APPCRASH of hpsum_service_x64.exe).

 

And this is not the only machine with this issue. I had the same problem on a similiar machine a week ago, where I got it finally working by starting HP SUM with the '/silent' parameter in a command line.

Unfortunately this doesn't work on this machine, either.

There's no external storage attached, no mezzanine cards, ...

 

The firmware has already been updated by booting the server with SPP, so I just want to install all the drivers.

 

I already spent 2-3 days with it, so any help would be very much appreciated!!!

 

 

Thanks in advance and best regards,

Stefan

2 REPLIES
spvmanian
Occasional Visitor

Re: "HP Smart Update Manager stopped working" on BL460c G6

Hi ,

 

First you restart the server. Thereafter you can clear the temporary files in the windows folder and then try again.

 

%temp%  folder..

 

all the best!

StPi
Occasional Contributor

Re: "HP Smart Update Manager stopped working" on BL460c G6

Thanks, I tried that already but it didn't work. 

 

Anyway, I think I fixed it. 

By default only Microsoft Security updates are released for installation by our WSUS server, not the standard and recommended updates. 

I bypassed our WSUS and installed all available Microsoft updates and afterwards the HPSUM finished successfully.

 

Regards, 

Stefan