BladeSystem - General
1748202 Members
2963 Online
108759 Solutions
New Discussion

Re: Recovery of AiO SB600c failing

 
Patrick Terlisten
Honored Contributor

Recovery of AiO SB600c failing

Hello members,

I'm trying to restore a SB600c with the recovery dvd. The recovery fails by an unsupported logical drive configuration. The AiO was installed by another partner with a W2k3 default installation. All logical drives on the embedded E200i were deleted.

I think I need two logical drives on the E200i but I don't know the right size.

Thanks for advice.

Best regards,
Patrick
Best regards,
Patrick
1 REPLY 1
Patrick Terlisten
Honored Contributor

Re: Recovery of AiO SB600c failing

Hello,

life can be so simple... just deleting ALL logical volumes with ORCA. After the first boot of the recovery dvd, the setup is creating the needed logical drives itself.

Best regards,
Patrick
Best regards,
Patrick