DMZ Configuration on Blade Servers Issue

[ather]

Hi ,

We have C7000 enclosure and BL 460 C G7 servers which We need to configure multiple V LAN  networks on the same blade server profile so it can be reflected on the OS and must be linked simultaneously ?

We would also need to configure DMZ VLAN require to be added on same Blade machine on which we have our Virtual Area Network so that the Hyper V client VM can be added to DMZ zone VLAN.

Can anyone help on the scenario I would appreciate any asssistance 

Regards

Ather Ali Faisal

[Casper42]

Which Network Interconnect are you running?

If you have Virtual Connect Flex-10 or FlexFabric I know exactly how to do this.
But even with Cisco or HPN Switches it should still be possible using VLAN Tagging.

Here is the Hyper-V Cookbook for Virtual Connect FlexFabric that discuses how to do this. Flex-10 would be similar but without the FCoE stuff.
http://h20195.www2.hp.com/V2/GetPDF.aspx%2F4AA1-9257ENW.pdf