HPE BladeSystem
Showing results for 
Search instead for 
Do you mean 

BL460 G8 second HBA mezzanine card

SOLVED
Go to Solution
Trusted Contributor [Founder]

BL460 G8 second HBA mezzanine card

Hello all,  I need help with 3 BL460 G8 blades on a HPC7000, we recently installed a second FC mezznine card for all the 3 blades. everything seems to be ok except that the cards are pointing to Bay 5 and 6. We dont have anything on Bay 6 and on Bay 5 we have a fiber switch.  Is there a way to change the port mapping to use bay 3 and bay 4 instead of bay 5 and bay 6

 

Please let me know if this is possible and how can I make the changes.

 

 

Attached is a port-map screen print for one of the blades.

thank you

juan

 

 

 

1 REPLY
Highlighted
Acclaimed Contributor [Founder]

Re: BL460 G8 second HBA mezzanine card

The connections are hard wired, no way to change.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!