blade 460c G1

[Joe Pagano]

I'm getting a internal degraded status on this blade. There are four other blades in this chassis with no issues. Only this blade is showing degraded.I moved all vm's off the blade yesterday. Powered off and reseated this blade and status ok. Same issue today internal degraded status nothing in the logs.Any suggestions thanks

[Proliant VMS San Mgrs]

Joe:
What firmware for the ILO? BIOS of the blade?
What OS on the blade (should not matter but...)

What does the Insight display show? Is the red heartbeat light on the blade lit? any beeping?

You said nothing in the logs:

ILO event log?
IML log?

Any OS logs?

[Johan Guldmyr]

You can put the blade in another bay to see if the problem follows the blade.

[Hiren N Dave]

Need to do some work around before moving further...

=> Check current ROM/BIOS/firwmares, upgrade if not latest
=> Check IML, Event Logs, syslogs for any clue
=> Perform h/w diagnostics from OA/iLO and check if any hardware issue is there
=> Check POST messages for any clue

You should definitely get some clue from above...if not, contact HP Support.