BladeSystem - General
1752603 Members
5700 Online
108788 Solutions
New Discussion

c7000 onboard administrator does icmp echo to default gateway

 
bj0
Visitor

c7000 onboard administrator does icmp echo to default gateway

Hello,

 

Our newly installed c7000 blade enclosure with FW 3.32 OA does (every minute) ping (icmp echo) the default gateway.

We're having 2 OA's with fixed IP adresses. Features like Enclosure IP Mode or Link Loss failover are currently not enabled.

 

Is it possible to change this behavior?

6 REPLIES 6
S_Logan
HPE Pro

Re: c7000 onboard administrator does icmp echo to default gateway

Hi,

 

Please note the following OA commands:

 

ENABLE LLF
• Command: ENABLE LLF
• Description: Enables Link Loss Failover for Onboard Administrator Redundancy.
• Access level/Bay level: Operator, Administrator
• Restrictions: You must have OA permission to perform this command

 

ENABLE ENCLOSURE_IP_MODE
• Command: ENABLE ENCLOSURE_IP_MODE
• Description: Enables Enclosure IP Mode
• Access level/Bay level: OA administrator, Operator
• Restrictions: When using enclosure IP mode only replace the standby OA module while the enclosure is powered on to ensure persistence of Enclosure IP Mode settings.

 

More infromation:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00702815/c00702815.pdf

 

HTH
Surendar
How to assign KUDOS! Click the STAR!

HP Guided Troubleshooting - www.hp.com/support/hpgt

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
bj0
Visitor

Re: c7000 onboard administrator does icmp echo to default gateway

I know how to enable those features but thats not my problem, i wanna turn of sending icmp echo messages from the onboard administrator to its default gateway.

Psychonaut
Respected Contributor

Re: c7000 onboard administrator does icmp echo to default gateway

Maybe it's this?

 

SET NTP POLL
• Command:
SET NTP POLL <seconds>
• Description:
Sets the polling interval of the NTP servers
• Access level/Bay level:
Enclosure network configuration commands 93
OA administrator, OA operator
• Restrictions:
Poll time should be between 60 and 86,400 seconds

bj0
Visitor

Re: c7000 onboard administrator does icmp echo to default gateway

Unfortunately this doesn't help, the OA keeps sending icmp echo's to its default gateway

 

sc_aopc
Visitor

Re: c7000 onboard administrator does icmp echo to default gateway

bj0, where you ever able to find an answer?

Mahima1
New Member

Re: c7000 onboard administrator does icmp echo to default gateway

Hi Team,

 

I am also facing the same issue. The blade controllers ADBLMG01 and ADBLMG02 sends continous ICMP requests to DNS server. According to the Security Policy this is not allowed. Can you please check this behaviour and let us know if it's possible to correct it? ICMP request frequency is approx 1minute. LLF is also enabled.

 

Someone suggested me to remove the DNS server entry from OA. Is it safe to do this change?

 

Kindly suggest.