4100 HP-Brocade Fibre Switch (4/32 )

[Schwarzie]

Hi,

Does anyone know how you can view and change the duplex setting of the Ethernet NIC on this switch? We have two of the exact same 4/32 fibre switches running 6.2.0g, one has negotiated in at full and the other to half.

I need to ensure the NIC's on both switches are set to Full.

Any help appreciated and points are on offer for the first helpful answer!

[Schwarzie]

Found the solution. If anyone is interested its.......

switch:admin> ifmodeset eth0

Auto-negotiate (yes, y, no, n): [yes] n

Force 100 Mbps / Full Duplex (yes, y, no, n): [no] n

Force 100 Mbps / Half Duplex (yes, y, no, n): [no] n

Force 10 Mbps / Full Duplex (yes, y, no, n): [no] n

Force 10 Mbps / Half Duplex (yes, y, no, n): [no] y

Committing configuration...done.