HPE EVA Storage

Accessing Config for MSA2012fc

 
Sean Ahearn
Occasional Advisor

Accessing Config for MSA2012fc

I'm trying to access the SMU for a MSA2012fc in a remote office. I ran the MSA Device Discovery tool and got the IP Address for the ports. The status for the MSA is ok. I can ping both address's but when I put the address in the browser, I get page cannot be displayed.
3 REPLIES 3
NXS
Valued Contributor

Re: Accessing Config for MSA2012fc

did you try https or http
Sean Ahearn
Occasional Advisor

Re: Accessing Config for MSA2012fc

I did both with no luck.
Sean Ahearn
Occasional Advisor

Re: Accessing Config for MSA2012fc

I figured it out. For anyone wishing to know, I had to restart the management controllers. I was able to telnet into the controllers and run the following command, restart mc a and then after that came back up, restart mc b. Make sure the controller comes back up before restarting the other mc.