HPE EVA Storage

Adding multiple vDisks to an existing DR Group

 
Aslam Ghumra_2
Frequent Advisor

Adding multiple vDisks to an existing DR Group

We've just added a new EVA6400 and we are trying to add vdisks to an existing DR group.  We've found that by creating a new DR group, this can be done.  We would like to avoid this.

 

Looking through other posts it seems it can be done via SSSU but we were wondering if this can be done using either RSM or CV ( we are using 10.1 ).

 

e.g. eva6400 (source vdisk) -> eva8400 (destination vdisk),also copied to new eva6400 (destination vdisk)

 

Any help much appreciated.

 

Aslam

1 REPLY 1
giladzzz
Honored Contributor

Re: Adding multiple vDisks to an existing DR Group

Hi

There should be no problem adding a new Vdisk to an existing DR group in command view just go to the Vdisk to the DR tab and click the button. I don't think you can replicate one Vdisk to two EVAs any thing that can be done in command view can be done with RSM just remember RSM is not a real-time application ( it has to be refreshed)

you can check in the CA manual.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02838340/c02838340.pdf

Regards

 

Press the Kudos star if you liked