HPE Community
HPE EVA Storage
1753718 Members
5919 Online
108799 Solutions
New Discussion

Brocade 12000 - boot problems

 
SOLVED
Go to solution
inex
Super Advisor

‎11-19-2010 02:58 AM

‎11-19-2010 02:58 AM

Brocade 12000 - boot problems

Hi,
I got boot problems on a 12000 switch.
Any suggestions how to solve it?
(see enclosed file for messages)

-inex
0 Kudos
Reply
1 REPLY 1
krusty
Honored Contributor

‎11-29-2010 04:07 PM

‎11-29-2010 04:07 PM

Solution

Re: Brocade 12000 - boot problems

My best guess is you have a corrupt or bad Compact Flash card in one of ther CP cards. The switch uses the CF card like a hard drive and is trying to boot from it, but it can't.

I don't know if the CF cards are an FRU, or you have to replace the whole CP card. You could try pulling one of the CP cards, and if it boots with that one you know which is bad.

Cheers,

Curt
"In Vino Veritas"
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.