HPE EVA Storage

Brocade 4 gb SAN switch - Commands needed....

 
RBanse_1
Occasional Contributor

Brocade 4 gb SAN switch - Commands needed....

I would like to download the config on my Brocades using a third-party tool (Solarwinds), but not familiar with what the command is for showing the running config. In the Cisco and HP world, it's a sho run. But what about the Brocade world of things?
3 REPLIES 3
Steven Clementi
Honored Contributor

Re: Brocade 4 gb SAN switch - Commands needed....

for "all" of the config...

configshow

for alot less stuff (the stuff you probably want to see)...

switchshow
fabricshow
zoneshow


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
Steven Clementi
Honored Contributor

Re: Brocade 4 gb SAN switch - Commands needed....

or... are you using the tftp portion of Solarwinds?


you can probably run configdownload...

to get a config that you can eventually upload to restore it.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
RBanse_1
Occasional Contributor

Re: Brocade 4 gb SAN switch - Commands needed....

Thanks! I figured it out by doing a manual process of configUpload and chose my FTP server.