HPE EVA Storage

Brocade 4100 firmware fails - fabosShowInit failed: -1

 
KurtG
Regular Advisor

Brocade 4100 firmware fails - fabosShowInit failed: -1

Switch stucked in reeboot loops;

Bypassing firmware validation.
--- Partition /dev/hda1 is inconsistent.
--- Its content will be restored to be the same as that of /dev/hda2.
--- Please check the version and re-load firmware if necessary after the system boots up

This is repeated....
Switch has been upgraded to 5.2.1, 5.3.2b, 6.0.1a, 6.1.1d but got the issue with the 6.2.1 version. The switch did no show any issues before the upgrade.

I do not know if both partitions as are affected but as the switch does not recovery by itself I guess they are both corrupted.

KurtG