HPE EVA Storage

Brocade 6.3.0b DNS resolution not working

 
jpmartin
Regular Advisor

Brocade 6.3.0b DNS resolution not working

Hi,

after installation and configuration of 24 ports 8Gb/s models (HP ref AM867A) shipped with version 6.2.0d, i can access successfully with their DNS names.

But the 6.3.0b upgrade prevent this, and now, the only way to access the switchs is with their IP addresses.

Any ideas ?

Jean-Pierre

6 REPLIES 6
Steven Clementi
Honored Contributor

Re: Brocade 6.3.0b DNS resolution not working

Are you sure it is a switch issue? and not a DNS issue?

Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
jpmartin
Regular Advisor

Re: Brocade 6.3.0b DNS resolution not working

not sure,

but when the switch has been accesses with DNS name, we have a message showed explicitly at home page that accessing the switch must be made with its IP adress,

and this message gives the good IP adress.

No configuration modification have been made between 6.2.0d and 6.3.0b
Steven Clementi
Honored Contributor

Re: Brocade 6.3.0b DNS resolution not working

Can you post a screenshot?
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
jpmartin
Regular Advisor

Re: Brocade 6.3.0b DNS resolution not working

Sorry,

it was yesterday, and i did not catch it.

And now with everybody in holiday, i cannot do it before next week.

Jean-Pierre
jcd_2
Frequent Advisor

Re: Brocade 6.3.0b DNS resolution not working

Command line access with DNS name is working, too
jpmartin
Regular Advisor

Re: Brocade 6.3.0b DNS resolution not working

In DNS switch option, we have entered DNS names without success, too.

Any ideas ?