HPE EVA Storage

Brocade Director 48000 Issues

 
GVK_Cap
Occasional Contributor

Brocade Director 48000 Issues

Hi All,

 

I have received these messages in Brocade 48000 Directors

 

1:) Information port 352 (0x160) enforcement changed to Session Based HARD Zoning. err code: ZONE-1004

 

2:) Warning Switch status change contributing factor Marginal ports: 1 marginal ports. (Port(s) 160(0xa0))--

       Error code: FW-1436

 

Its a brocade Director : 48000.

 

looking for your inputs on these..

 

 

Chriss..

1 REPLY 1
Johan Guldmyr
Honored Contributor

Re: Brocade Director 48000 Issues

Hey,

 

because error messages might differ between Fabric OS versions, the version you are running is somewhat important.

 

1) If you use this port in both a "DID, PID"-zoning and wwn-based zoning it will be zoned with "session based zoning". This is software zoning.

 

2) You got some problems with port 160. Run portstatsshow, sfpshow, etc and troubleshoot further. The switch has changed because a threshold has been surpassed. See "switchstatuspolicyset".

 

By the way, I found details about this in the "Fabric OS Message Reference" document.