HPE EVA Storage

Brocade Silkworm 2800 (HP A5642A) Failed start after firmware upgrade

 
Adam Skaffloth
New Member

Brocade Silkworm 2800 (HP A5642A) Failed start after firmware upgrade

I followed instructions in a previous post to the newer firmware for this switch and upgraded the switch from a2.4.1 to 2.6.2d.

The firmware upgrade seemed to go fine:
Updating flash ...
Committing configuration...done.
173440+9020+20344, csum 370d
loading to ram ......................
writing flash 0 ......................
writing flash 1 ......................
download complete
http: server initialized
firmwareDownload Done.

After reboot all ports light are orange and then led backlight turns on but nothing more.

Anyone know how to solve this?


1 REPLY 1
Ravi_Shankar
Frequent Advisor

Re: Brocade Silkworm 2800 (HP A5642A) Failed start after firmware upgrade

Try pushing Switch firmware using SAN surfer (ask HP to provide) . I have solved several firmware issue using this tool.