HPE EVA Storage

C7000 EBIPA addressing for Cisco 9124 switch

 
stkey
Occasional Contributor

C7000 EBIPA addressing for Cisco 9124 switch

I've just installed Cisco 9124 switches into a C7000. I've set the management IP address in the OA's EBIPA addressing. But it is not updating the IP to the module. If I look at the information tab, I see some other IP address for the module. Removing the module, powering down the enclosure, etc does not shake it free. It is almost as if the module is set to static ip. But there is no console port or serial port on the module to back door into it and set it. Any ideas? OA firmware is 3.11.
1 REPLY 1
MAH_2
Regular Advisor

Re: C7000 EBIPA addressing for Cisco 9124 switch

1. Log in to the OA/iLO port through the console or telnet.
2. Connect to the appropriate Cisco MDS 9124 Switch bay.

OA> connect interconnect x