Command View 7

[JP Gatt]

I am currently using Command View 7 to manage an EVA 4100.

To anyone's knowledge (since I can't seem to find much references to version 7 on HP's site), is v7 compatible with Windows 2008 x64?

Thanks

[IBaltay · Accepted solution]

Hi,
maybe this could help you:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01733112/c01733112.pdf

[Uwe Zessin]

The compatibility reference from December 2007 also says that x64 is supported.

[JP Gatt]

Uwe,

Could you please link the document?

Thanks

[Uwe Zessin]

I am not sure if it is still available for download. HP sometimes replaces files, but it is small enough so I attach a copy.

[Uwe Zessin]

Oh, wait... you're asking for Windows 2008 ...

That requires CV-EVA V9.0 earliest (replaced by 9.0.1/9.1) - see page 15 of this attachment or (as of today the latest) the June 2009 edition:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01804529/c01804529.pdf

[JP Gatt]

Thanks Uwe.

Seems like v7 is not supported on 2008.

[JP Gatt]

Thanks Baltay ..

Seems like only v9 is supported.

[JP Gatt]

Solution found