Command View 9.0.1 not Showing leveling progress

[Khurram Shahzad]

Hi I have an EVA-3000 with an appliance server hosting Command View EVA 9.0.1. I added disks to a group although I do see that the group is leveling and available disk space is increasing, the "Leveling Progress" field displays "N/A".

The same EVA is connected to an appliance server with command view version 8 in this machine the leveling progress always displayed a percentage.

Please help me to solve the issue as i have to discard the old CVEVA server.

[Sudhakar Subramaniam · Accepted solution]

Try restart the CVEVA server and check.

[Sudhakar Subramaniam]

Please also let us know the EVA controller firmware revision

[Víctor Cespón]

Hi, this is a known issue with Command View 9.x, it does not display leveling % on EVAs 3000 and 5000.

[Johan Guldmyr]

Is this perhaps improved in 9.1, 9.2 or 9.3?

Release notes can be found here:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=471497

[Khurram Shahzad]

Hi I have installed 9.0.1 how to upgrade it to the latest please provide the download link

[Johan Guldmyr]

You can get 9.3 on http://software.hp.com

But I believe you have to go to 9.2 or maybe even 9.2.1 in between if you want to do an upgrade.

I don't know where to get the download link for that, maybe HP support can assist with that.

[Johan Guldmyr]

Also you can see in the "HP StorageWorks Enterprise Virtual Array Compatibility Reference" which steps you need to take.

I found it on google.

[Khurram Shahzad]

Bundle of Thanks

[Johan Guldmyr]

No problem, by the way, which VCS version are you running on the EVA?